10 Questions You Should to Know about Hot Rolled Pickled Coil

Flat Rolled Low Carbon Sheet

If you are new to the steel industry or just need a refresher, MVSS is pleased to offer the following information to make your job easier. Let us know if you have any questions, we are here to help.

Click here to download the Steel 101 presentation

Sections

Steel Mill Types | Common Steel Types | Common Types of Coated Steel | Chemistry | Steel Grades and Hardness | Steel Strength (Mechanical Properties) |  | Steel Supply Chain

Link to Hunter Special Steel Co., Ltd

steel \ˈstēl\  

A generally hard, strong, durable, malleable alloy of iron and carbon, usually containing between 0.2 and 1.5 percent carbon.

Steel Mill Types

There are different types of flat rolled steel mills:

Integrated Mills | Mini Mills | Conversion Mills

Integrated Mills: The principal raw materials for an integrated mill are iron ore, limestone, scrap, and coal (or coke). These materials are charged in batches in a blast furnace where the raw materials are converted to liquid iron (also called pig iron). The material is then moved to a basic oxygen furnace (BOF) for final chemistry refinement. Material is poured into a thick slab and is cooled for future rolling. Slabs must be reheated in ovens to be rolled down to a final thickness.

Advantages: generally produces broader grades and types of steel than mini mills.

Examples:

• Arcelor Mittal
• AK Steel
• US Steel
• Essar Algoma

Mini Mills: Obtains most of its iron from scrap steel recycled from used automobiles and equipment or by-products of manufacturing. Material is melted in an Electric Arc Furnace (EAF). Material is continuously cast from the laddle into a slab form and while still heated is rolled to a final sheet product.

Advantages:

• Newer and efficient infrastructure
• Uses recycled material- more Eco friendly
• Reduced energy costs than other types of mills
• Less labor required
• Produces less pollution
• Reduced leadtimes
• Improved gauge control

Examples:

• Steel Dynamics (SDI)
• Nucor
• North Star BlueScope Steel
• Big River
• NLMK Indiana
  

Conversion Mills: Convert slabs into flat rolled coils by heating them up and reducing gauge through rolling mills.

Advantages:

• Leadtimes
• Smaller min order quantity
• Flexibility on size / width of coils

Examples:

For more information, please visit Hot Rolled Pickled Coil.

• NLMK PA
• Wheeling Nisshin
• AM/NS-Calvert (Arcelor Mittal / Nippon Steel)
• CSN
  

Common Steel Types

Hot Rolled (Hot Rolled Black) : molten steel that is cooled and formed into coils while steel is red hot (approx. 1,700°). Product has scale , which is a oxide coating that is formed at high temperatures. Rust forms on unprotected metal and is often stored outside.

Hot Rolled Pickled & Oiled (HR P&O): Hot rolled black is uncoiled and sent through a series of hydrochloric baths that removes scale, rust, and unwanted debris. The coil is then lightly oiled for temporary rust prevention.

Cold Rolled Steel (CR):
Is produced by running HRP&O steel through a series of rollers at room temperature to reduce thickness. The rolling process can increase strength and improve surface finish.

When reducing gauge by a large percentage the material becomes brittle and hard and must go through an annealing (baking) and tempering process to regain formability and required hardness.

Common Types of Coated Steels:

Electro-Galvanized (EG/EL):Zinc plating process whereby the molecules on the positively charged zinc anode attach to the negatively charged sheet steel. Thickness of coating can be readily controlled by electric charge or changing the speed of operation.

Great surface for painting and precise coating thicknesses

Applications: Automotive (electrical components, body panels) and Appliance (dishwashers/ stoves etc.)

Galvanized (GA): Hot dipped galvanized is manufactured by passing steel through a molten bath of zinc to form a thin layer of corrosion resistance. Leaves a crystallization pattern on surface called spangle.

Uses: HVAC & Construction

Galvanneal (GN): Is produced by taking a hot dipped galvanized coil and passing it through a series of furnaces that raise the temperature so that iron atoms from the sheet move into the zinc coating to form a zinc-iron layer.

Great surface for painting and a lower cost alternative to Electro- Galvanized.

Steel cut to your size requirements for pattern cutting. Whether standard sizes for laser cutting (4’x8” or 5x10’) or custom for your requirements , we ensure it performs in terms of flatness and consistency when you go to form your parts. Our inline temper mill at our pickle line and state of the art leveler ensures reliable quality. Typically, fabricators consume cut-to-length sheets due to their demand volume, machine capabilities or type of part they want to economically fabricate.

Before steel is slit, it is referred to as a full coil—regardless of whether it’s hot rolled, cold rolled, or coated (such as galvanized, galvannealed, or aluminized). These coils are typically large, weighing between 16 and 20 tons, and require heavy-duty equipment for handling and processing. Full coils are commonly ordered by manufacturers producing large, high-volume parts or by companies that perform their own slitting or de-coiling in-house.

If you want to learn more, please visit our website Cold Rolled Steel Automotive.