What is the Advantage and Disadvantage of Air-Cooled Flower Display Chiller

Air-cooled vs. Water-cooled Chiller – Comparing Differences

Industrial machines and processes generate a lot of heat. If the heat isn’t removed, it can damage equipment or ruin finished products. Chillers help manage that heat and keep everything running at the right temperature. These systems keep things cool and running smoothly. There are two main types: air-cooled and water-cooled chillers. Both do the same job, but they go about it differently.

For more information, please visit our website.

Air-cooled Chiller vs. Water-cooled Chiller

Air-cooled vs. Water-cooled Condenser

There are distinct differences between the condenser of an air-cooled chiller and a water-cooled chiller. Air-cooled chillers are equipped with condensers that utilize ambient air to reduce refrigerant temperatures. Fans force the air over tubing containing refrigerant and therefore eliminate heat from it. The cooled refrigerant used in chillers can then be circulated through the industrial process to achieve a cooling effect.

By contrast, water-cooled chillers take advantage of the high heat capacity of water to facilitate refrigerant chilling. The typical coolant used in water-cooled systems is a mixture of water and chiller glycol, which is circulated in a sealed network of tubing. Cooling occurs when the chilled refrigerant is passed through a heat exchanger that interfaces with the industrial process. Warmed coolant is then returned to a cooling tower or refrigeration unit, eliminating acquired heat in preparation for another cooling cycle.

However, these aren’t the only differences in air cooling vs. liquid cooling.

Expenses

Another critical factor to note in comparing an air-cooled chiller and water-cooled chiller is the cost of purchase, installation, and maintenance.

Initial Costs

By their design and operation, air-cooled chillers appear costlier at face value when compared to water-cooled units. To begin with, air-cooled systems will feature installation costs for air ducts, fans, and thermoregulation controls. Does this mean that liquid cooling is better than air cooling? Not necessarily. There are more expenses to factor in.

Reminder: Consider total system costs, not just the unit. Installation needs like cooling towers and pumps can significantly affect your budget.

Operating Costs

Additionally, air-cooled chiller systems consume more energy to power the fans that facilitate their cooling effect, translating into higher electrical bills.

On the other hand, even though water-cooled chillers cost less to set up, they generally have more long-term operational costs as most of these chiller types will need to have cooling towers installed.

Did You Know? If your facility runs 24/7, the higher efficiency of water-cooled systems can offset their added complexity.

Capacity Range

Is water cooling better than air cooling when it comes to size? Air-cooled chillers come in sizes ranging from 7.5 – 500 tons. Meanwhile, water-cooled chillers offer a higher cooling capacity of 10 – 4,000 tons. 

Environment/Location

The planned location of a chiller unit is another crucial point to consider when deciding on an industrial cooling solution. Again, depending on site plans, there are pros and cons to opting for air-cooled or water-cooled chillers.

Indoor Locations

Both air-cooled and water-cooled chiller variants can be installed in an indoor location. However, additional space considerations must be made for air-cooled chillers. This is because air-cooled chillers require access to enough ambient air to function correctly.

Situating an air-cooled chiller in a poorly ventilated indoor space will hamper its cooling abilities and reduce efficiency. By comparison, water chillers can be installed in areas with minimal ventilation as their cooling towers can be placed on the building’s exterior.

Outdoor Locations

Opting for an air-cooled chiller in an outdoor setting is advantageous as there is unlimited access to a high flow of the ambient air required to facilitate coolant chilling. Consequently, water-cooled chiller systems are seldom situated in an outdoor location.

Environments with Elevated Temperature 

Water-cooled chillers are the best choice for industrial areas with high thermal outputs. However, air-cooled units will perform poorly in environments with elevated temperatures as the chillers and cooling towers will struggle to dissipate the heat held within the coolant tubing.

Locations with Poor Water Supply 

The choice in situations where there is a poor water supply is easy. An air-cooled chiller is the best choice in such cases as long as it is installed in an adequately ventilated area. Therefore, available water can be channeled into other production processes where it is indispensable.

Ice Forest are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.

Environmental Regulations

When choosing a chiller system, local or regional regulations on industrial effluents are a critical issue to address. In this regard, an air-cooled chiller is more advantageous as there is no concern about releasing waste materials into the environment.

Wastewater from open-loop water-cooled chillers will require treatment before being released into natural water bodies, implying additional costs for operators. Fortunately, all of the water-cooled units at Cold Shot Chillers are closed-loop chiller systems that are very environmentally friendly.

Equipment Longevity

Water-cooled chilling systems have a lifespan of about 20 – 30 years. On the other hand, air-cooled units typically last 15 – 20 years.

The reason for this difference is that water-cooled chillers are usually installed inside and operate at lower condenser pressures, and outdoor air-cooled chillers operate at higher condenser pressures. Either way, proper commercial chiller repair can extend the life of your equipment, so don’t neglect it!

Expert Tip: Keeping up with regular maintenance (like coil cleaning and fluid checks) can extend your chiller’s life regardless of type.

Chiller Efficiency

Which process is more efficient: water cooling or air cooling? By comparison, water-cooled chillers are more efficient than air-cooled variants. Air-cooled chiller efficiency is dependent on the temperature of the ambient air being used in its cooling system. The higher the circulating cooling air temperature, the less efficiently an air-cooled chiller will perform.

Overall, more energy will be expended to repeatedly pump air through the chiller heat exchanger to achieve the desired coolant temperatures.

Comparably, water-cooled chiller efficiency is much higher as they operate less dependently on ambient environmental air temperatures. In addition, utilizing water cooling towers or refrigeration units will ensure a steady regulation of chiller fluid within an optimal range. Therefore industrial processes using these chillers will be cooled appropriately.

Learn more about how a chiller works.

Noise Level

Is there a difference between an all-air system and an all-water system when it comes to noise output? Yes. Outdoor air-cooled chillers are known to produce higher noise levels via chiller condenser fans. However, low-noise options are available with a sound-proof design and reduced fan rotation speed. This results in significantly lower sound pressure levels.

Contact Cold Shot Chillers for Air-cooled Chillers and Water-cooled Chillers

There are many aspects to consider when deciding between an air cooling vs. liquid cooling chiller system. When in doubt, you should consult with an expert and discuss your specific application and situation.

At Cold Shot Chillers, we provide a wide range of air-cooled and water-cooled industrial chiller units to cater to all your industrial and commercial process cooling needs. 

Floral coolers are an essential part of the flower industry for their ability to keep flowers fresh for a longer period than traditional commercial refrigerators.

As the flower is exposed to more room temperature air it, will begin to lose its freshness, and start to wilt and turn color. The floral industry has grown exponentially as more and more nontraditional stores add flowers to their product lines. Today we see floral coolers at the grocery store, hospital, and even the airport. Here are a few reasons why a proper floral cooler is imperative to the health and longevity of your flowers.

Humidity:

Floral coolers are designed to provide flowers with a high percentage of humidity; typically 80-95%. This influx of moisture keeps your flowers free from dehydration damage. Humidity is an integral part of a lasting arrangement. As a florist, you may consider the delicate balance each flower requires when you start shopping for a floral cooler. There may be variations in the percentage of humidity when different flowers are stored in the cooler. Keep like flowers together before they are arranged to help extend the life of your final arrangement.

Temperature:

Temperature is a significant consideration when working with flowers. Just as with humidity, temperature will vary based on the type of flowers you are storing. Extreme cold is not always best and can cause your flowers to be exposed to chill damage faster than if exposed to room temperature air. Floral coolers are designed to circulate air gently, so damage and wilt are minimal. The influx of air is regulated and consistent as to not damage the integrity of your flowers.

Display:

Floral coolers are designed with shelving that can be moved and resized easily. A variety of shelving options can prove helpful when trying to accommodate large flower arrangements or buckets of flowers.

For more Air-Cooled Flower Display Chillerinformation, please contact us. We will provide professional answers.